12BB Belly Boat, type JUMBO S - Special Carbon Edition is a "Semi Large Edition" "Customized" high end Belly Boat,
This extremely sturdy and stable belly boat made of strong PVC with a material thickness of 1.2 mm in a beautiful carbon look.
The Belly Boat is equipped with an inflatable seat and an extra inflatable bottom for a high sturdy seat.
This makes the BB very suitable for use in cold weather and under the toughest conditions.
This Belly Boat is made in an extra large size especially for large water and/or heavier people or for extra equipment (luggage, electric motor, high capacity battery, etc.).

Furthermore, the Belly Boat is equipped with luxury tube bags with front and side pockets on both tubes with 4 buckles per bag and a luggage just behind the seat.
The boat is inflatable via 3 air chambers (two in the tubes 1 in the bow, and equipped with safety valves.
The seat is equipped with 2 separate chambers and the bottom also has its own valve,
which ultimately means that the BB is equipped with 6 air chambers for extra safety.
The bow is also equipped with a pressure relief valve, so that any overpressure caused, for example, by heat can be prevented from damaging the tubes.
NOTE: For the pressure relief valve to function properly, the air chamber where the pressure relief valve is located must be inflated first, and only then the other air chambers.
The carrying capacity of the 12BB.eu Belly Boats is the highest of the currently available double V-shaped Belly Boats on the market.
The carrying capacity of the 12BB, type JUMBO-S is more than 250KG. (Test carried out up to only 250KG).

The D-rings are well secured with extra patches, the ends of the tubes are convex and reinforced with a thick rubber patch,
which means that the BB can be put upright without the risk of damage.
The entire boat is equipped with an additional bumper all around.
And an extra wide protective strip has been added to the entire underside of the tubes for extra protection and durability.

Colour 12BB Belly Boat, type JUMBO_S NP - Special Carbon edition
Dimensions Belly Boat - approx. 190x120 cm
Tube diameter: 35 cm
Width Seat: 52 cm / Depth seat: 46 cm / Height Backrest 55 cm
Weight - +/- 16.5 KG
Max air pressure Tubes: 0.25 Bar / 3.62 PSI
Max air pressure Bottom: 0.35 bar / 5.07
NOTE: the air pressure in the tubes can increase due to heat from sunlight, for example.
Keep an eye on this during use on warm days and release some air if necessary.

BB is supplied incl. pump with special filling valve, luggage net, carrying straps, 2 luxury tube bags with front and side pockets, 3 handles (middle tube and bow), repair kit and carrying bag.
Incl. inflatable bottom and seat.